Details

• Brand:

  

  

• SKU:

  2U5Z-13411-SA

• Positions: Front Outer, Left Outer, Right Outer, Rear Outer, Front Right Outer
• Other Names:

  Signal Bulb Socket, Socket, Stop Lamp Bulb Socket, Park Lamp Bulb Socket, Headlight Socket, Holder, Turn Signal Light Socket, Brake Light Socket, Headlamp Assembly Socket, Tail Light Socket, Socket Assembly

• Description:

  This is the genuine Ford three-pin signal lamp bulb socket used in the rear and signal lighting of a range of 2004 to 2011 vehicles including Crown Victoria, F-150, Ranger, Mark LT, Navigator, Zephyr, Milan and Montego. The socket holds the bulb in the lamp housing and connects it to the vehicle wiring, providing the electrical contact and retention that let the turn signal or related function operate. A bulb socket is replaced when its contacts have corroded or burned, when the socket housing has melted or cracked from heat, when a bulb flickers or fails to light despite a good bulb, or when the locking tabs no longer hold the socket in the housing. A bad socket commonly causes an intermittent or dead signal lamp, a rapid or erratic flash rate, or corrosion-related faults, and poor lamp operation is both an inconvenience and a safety and inspection concern. Installing a new genuine socket restores reliable contact and a secure fit. Replacement involves accessing the back of the lamp housing, twisting the old socket out, transferring or installing the correct bulb, and seating the new socket with a clean connection to the harness; cleaning or repairing corroded harness terminals improves longevity. Confirm the application and model year against your vehicle before ordering. Genuine Ford construction ensures correct pin configuration, bulb retention and housing fit for dependable lighting.

• Notes: Included with headlamp assembly. Included with tail lamp assembly.
• Replaces:

  YF1Z13411CA

WARNING: California Proposition 65

×

California Proposition 65

WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov