Details

• Brand:

  

  

• SKU:

  W711233-S441

• Positions: Rear Lower Lower, Left Lower, Right Lower
• Other Names:

  Lower Control Arm Cam, Trailing Arm Nut, Nut Hex Flanged

• Description:

  This genuine Ford nut, part number W711233-S441, is a rear lower control arm lock nut used on the Explorer and Explorer Sport Trac from roughly 06-10 to secure the lower control arm or its adjustment hardware. It is a flanged, self-locking hex nut that clamps the control arm bolt, holding the arm at its set position and preserving any alignment adjustment so the rear geometry stays correct. Buyers look for this nut when replacing a control arm or bushing, since the locking nut is often corroded or discarded and the joint must be clamped securely to hold alignment. A loose or worn lock nut lets the arm or its cam shift, causing alignment drift, rear-end clunks, or uneven tire wear. Ford lists this as a genuine lower control arm lock nut, and using the OEM part ensures the correct thread and locking feature so the joint stays tight. Installing the proper nut restores secure arm mounting and stable alignment. Torque to the published specification with the suspension at ride height where required, set the alignment before final tightening, and replace the nut rather than reusing the original so the self-locking feature works correctly.

• Replaces:

  w712412s441

WARNING: California Proposition 65

×

California Proposition 65

WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov