Details

• Brand:

  

  

• SKU:

  9C3Z-3A006-A

• Other Names:

  Power Steering Reservoir Cap, Cap

• Description:

  This Genuine Ford reservoir cap, cataloged as a Cap under base 3A006, is the screw-on cap for the power steering fluid reservoir on the 2007 through 2010 F-250 and F-350 Super Duty pickup. It threads onto the power steering pump reservoir to seal the fluid inside, hold the system's operating conditions, and keep dirt, moisture, and debris out of the hydraulic fluid that feeds the steering gear. Many caps of this type carry an integrated dipstick and a vent path so the reservoir can breathe correctly while the fluid heats and cools, and the sealing gasket on the underside is what keeps the reservoir from weeping at the neck. Owners look for this cap when the original has a cracked body, a torn or missing seal, a stripped or damaged thread, or a broken dipstick, which typically shows up as power steering fluid seeping around the reservoir neck, a low fluid level, a burnt fluid smell, or moaning and hard steering when the pump draws air. Because the neck diameter, thread, and seal are matched to the Super Duty reservoir, this cap is keyed to that reservoir and should be matched to your existing tank before installation. As a genuine Ford component it is built to the original sealing and venting specification, so it seats squarely, seals cleanly, and reads the fluid level correctly. Wipe the neck clean, thread the cap on by hand until it seats, and confirm the fluid level with the engine warm. No programming, adhesive, or special tools are required to restore a proper seal at the reservoir.

• Notes: Included with power steering reservoir assembly.
• Replaces:

  7C3Z3A006A

WARNING: California Proposition 65

×

California Proposition 65

WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov