Details

• Brand:

  

  

• SKU:

  7L1Z-13405-AA

• Positions: Left, Rear Left
• Other Names:

  Tail Lamp Assembly, Lamp Assembly

• Description:

  This genuine Ford tail lamp assembly is the driver-side rear combination lamp for the 2007-2017 Expedition, cataloged by Ford as a tail lamp assembly and listed in the left and rear-left positions. The housing carries the tail, brake and turn-signal functions in a single sealed lens and reflector unit that bolts into the rear quarter and plugs into the body harness, so it is a primary safety and lighting component that other drivers rely on to read braking and lane-change intent. Buyers usually need this lamp after a rear-end impact or parking-lot strike cracks the lens, after moisture intrusion fogs the housing and corrodes the bulb sockets, when a bulb keeps failing because the socket contacts are burned, or when the lens is faded and hazed enough to fail an inspection. A bad ground or corroded socket in the old lamp can also trigger a bulb-out warning in the message center. The base number splits strictly by side, so the driver-side assembly is not interchangeable with the passenger-side lamp, and the two must be ordered separately. Inspect the harness connector and pigtail for melted or greened terminals before installing the new assembly, transfer or renew bulbs as required, seat the housing on its locating pins so the lens sits flush with the quarter panel, and verify tail, brake and turn operation before the truck goes back into service.

WARNING: California Proposition 65

×

California Proposition 65

WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov