Details

• Brand:

  

  

• SKU:

  7L1Z-1000154-GA

• Positions: Upper, Left, Right
• Other Names:

  Body Mount Cushion, Insulator

• Description:

  This genuine Ford upper body mount insulator, cataloged as an Upper Insulator (body mount cushion), is a molded rubber isolator that sits in the cab-to-frame body mount stack above the frame bracket. Working together with the lower insulator and the mount cap, it cushions the body against the frame so road vibration, harshness, and noise are absorbed rather than transmitted into the cabin, while also holding correct body-to-frame ride height at that mounting point. It fits 2007-2017 Ford Expedition and 2007-2017 Lincoln Navigator equipped with the 3.5L GTDI or 5.4L V8 engine. A buyer looking for this insulator is usually chasing a clunk, squeak, or knocking noise over bumps and driveway transitions, a feeling that the body shifts or rocks relative to the frame, or has found the original rubber cushions cracked, crushed, dry-rotted, or collapsed after years of load and weather. Replacing worn insulators restores proper body isolation and quiet, solid ride quality. Because the body mount system uses several insulators at different positions, this position-specific part should be matched to its location, and the corresponding lower insulator and cap should be inspected at the same time. Ford recommends inspecting the mount bolts and supporting the body safely during service so the stack is reassembled in the correct order for full vibration isolation and correct ride height.

WARNING: California Proposition 65

×

California Proposition 65

WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov