Details

• Brand:

  

  

• SKU:

  8L8Z-17481-A

• Other Names:

  Lift-Gate Pull Handle Nut, Nut Wiper Arm Pivot

• Description:

  Genuine Ford Nut - Wiper Arm Pivot 8L8Z-17481-A is the threaded fastener that secures the wiper arm to the wiper pivot shaft on the 2008-2012 Ford Escape and 2008-2011 Mercury Mariner. It clamps the wiper arm onto the splined or tapered pivot output so the arm stays firmly indexed and sweeps the correct pattern across the glass every cycle. Though small, it is a critical piece of the wiper system: without proper clamping the arm can slip, chatter or walk off its parked position. Buyers looking for this part are typically dealing with a wiper arm that has loosened and rattles, an arm that slips out of park or fails to sweep the full glass, or a nut that was lost or stripped during wiper motor, arm or cowl service and now needs to be replaced with the correct factory fastener. Using the genuine hardware keeps the correct thread pitch and clamp load so the repair holds. The Ford catalog name is Nut - Wiper Arm Pivot. This is a genuine Ford component and carries the applicable Ford and Motorcraft parts warranty.

WARNING: California Proposition 65

×

California Proposition 65

WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov