Details

• Brand:

  

  

• SKU:

  W708848-S439

• Positions: Left Lower, Left Upper, Left Rear, Right Lower, Right Upper, Right Rear, Upper Lower, Upper, Upper Rear, Front Lower Lower, Front Lower Upper, Front Lower Rear, Front Lower, Front Upper, Front Rear
• Other Names:

  Mount Bracket Bolt, Upper Mount Bolt, Automatic Transmission Mount Bolt, Manual Transmission Mount Bolt, Trans Mount Bolt, Upper Trans Mount Upper Bolt, Lower Control Arm Bolt, Rear Bracket Bolt, Suspension Control Arm Bolt, Bolt

• Description:

  This genuine Ford bolt, part number W708848-S439, is a suspension control arm bolt in M12 x 50MM used across many Ford platforms from roughly 08-20 to clamp a control arm or bracket to the frame or subframe. It carries the suspension loads at the arm pivot and locates the arm so the geometry stays correct under cornering and braking. Buyers search for this bolt when replacing a control arm or bushing, since it is a single-use, torque-to-yield style fastener that should not be reused once removed. A worn or improperly torqued arm bolt can let the arm shift, causing alignment drift, clunking over bumps, or uneven tire wear. Ford catalogs this as a genuine control arm bolt with the M12 x 50MM size and notes it as single-use, so using the OEM part ensures the correct grade and clamp for a safe joint. Installing a fresh bolt restores proper clamp load and stable alignment. Torque to the published specification with the suspension at ride height where required, set any alignment adjustment before final tightening, and always fit a new bolt rather than reusing the original on this critical joint.

• Notes: Part cannot be reused/reinstalled.

WARNING: California Proposition 65

×

California Proposition 65

WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov