Details

• Brand:

  

  

• SKU:

  9L8Z-9D289-B

• Other Names:

  Purge Line, Tube Assembly Fuel Vapour Separat

• Description:

  This genuine Ford part is the evaporative emissions (EVAP) fuel vapor purge line, also cataloged as the Tube Assembly - Fuel Vapour Separator, for 2009-2011 Ford Escape and Mercury Mariner with the 2.5L four-cylinder engine. It is part of the sealed EVAP system that captures fuel vapors from the tank, stores them in the charcoal canister, and routes them to the intake manifold to be burned during engine operation rather than vented to the atmosphere. This molded line carries those vapors along the purge path and must hold a tight seal to maintain proper system pressure. When the tube cracks, hardens with age, or leaks at a connector, the EVAP system loses its seal and typically sets a small or large leak diagnostic trouble code, illuminating the check engine light and often causing a fuel-vapor odor or a failed emissions test. Drivers troubleshooting P0455, P0456, or similar EVAP leak codes on these Escape and Mariner models frequently trace the fault to a deteriorated purge line. Fitting the correct genuine tube restores a sealed vapor path and proper purge flow. Inspect the mating quick-connect fittings and grommets during installation and confirm the connections are fully latched to avoid a repeat leak code.

WARNING: California Proposition 65

×

California Proposition 65

WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov