Details

• Brand:

  

  

• SKU:

  AE5Z-19835-A

• Positions: Rear
• Other Names:

  Suction Hose, Evaporator Tube, Tube Assembly, yf3510

• Description:

  This genuine Ford air-conditioning refrigerant hose is the sealed line that carries refrigerant through the A/C system on the 2010-2012 Ford Fusion and its shared-platform companions, the Mercury Milan and Lincoln MKZ. The line routes pressurized refrigerant between the major A/C components and incorporates the correct factory fittings, O-ring seal seats, and crimped connections needed to hold system pressure without leaking. When an A/C refrigerant hose fails, drivers notice warm air from the vents, an air conditioner that no longer cools, oily residue or dye traces at the hose fittings, a hissing sound as refrigerant escapes, and a compressor that short-cycles or will not engage because the system has lost charge and pressure. Rubber hose sections can also chafe, crack, or balloon with age and underhood heat. Replacing the line with the genuine Ford component ensures the length, routing, fitting types, and barrier construction match the factory system so it seals correctly and survives underhood temperatures and pressures. After installation the system must be evacuated and recharged to the specified refrigerant charge, and fresh O-rings should be seated at each disconnected joint. Confirm your model year, engine, and the specific hose routing on your Fusion, Milan, or MKZ before ordering, since the platform uses more than one refrigerant line and the correct one must match your vehicle's A/C plumbing.

WARNING: California Proposition 65

×

California Proposition 65

WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov