Details

• Brand:

  

  

• SKU:

  BR3Z-5K483-B

• Positions: Front, Left, Right
• Other Names:

  Link, mef201

• Description:

  This genuine Ford front stabilizer bar link connects the front sway (stabilizer) bar to the suspension, transferring load between the left and right sides so the bar can resist body roll in corners and keep the car flat and predictable. It fits 2010-2014 Ford Mustang models, and the stud-and-socket link ties the end of the front stabilizer bar to the strut or control arm. Drivers who need this part are usually hearing a knock, clunk, or rattle over bumps and expansion joints, feeling increased body roll or a loose front end in corners, or a shop has flagged play in the link during an inspection. The ball sockets on a worn link develop slop or the boot tears and lets grease out and grit in, so the joint knocks and eventually seizes or separates. This is the genuine Ford link cataloged under base 5K483, supplied as a complete link with integral studs and boots ready to install. Torque the retaining nuts to Ford specification and hold the stud with a hex or wrench if it spins, and replace the opposite-side link at the same time since they wear as a pair for balanced handling. A failed link lets the stabilizer bar flop uncontrolled, degrading cornering stability and steering feel. Backed by the Ford genuine parts warranty.

• Notes: Part has related component that cannot be reused/reintalled. nut.

WARNING: California Proposition 65

×

California Proposition 65

WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov