Details

• Brand:

  

  

• SKU:

  9E5Z-13411-B

• Positions: Left, Right, Front, Rear
• Other Names:

  Signal Bulb Socket, Turn Signal Light Socket, Side Marker Light Socket, Park Lamp Bulb Socket, Marker Lamp Bulb Socket, Brake Light Socket, Stop Lamp Bulb Socket, Socket Assembly

• Description:

  This Genuine Ford socket, cataloged as a Socket Assembly under base 13411, is the bulb socket that holds a lamp bulb in an exterior lighting position and carries the wiring pigtail that supplies power and ground to that bulb, used on the Ford Fusion and shared across a range of Ford models through the 2010 to 2019 era. It plugs into the back of the lamp housing and locks with a twist, positioning the bulb correctly in the reflector and completing the electrical circuit through its terminals and connector. Owners look for this socket when a bulb keeps burning out, flickers, or will not light even with a known-good bulb, when the socket contacts are corroded, melted, or discolored from heat, or when the plastic housing is cracked so the bulb no longer locks in and seats. A failed socket often shows up as an intermittent or dead exterior lamp, a bulb-out warning, or scorching around the bulb base from a poor connection. As a genuine Ford component it is molded and terminated to the original specification so the bulb seats fully, the twist-lock engages, and the terminals make clean, reliable contact without the heat buildup that plagues damaged sockets. Because the same base number serves several lamp positions and vehicles, match the socket to your lamp housing and connector before installation to confirm the keying and terminal layout are correct. It installs by transferring the bulb, twisting the socket into the housing until it locks, and reconnecting the harness. No programming or special tools are required.

• Notes: Included with park lamp.

WARNING: California Proposition 65

×

California Proposition 65

WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov