Details

• Brand:

  

  

• SKU:

  BL3Z-6600-A

• Other Names:

  Engine Oil Pump, Pump Assembly Oil

• Description:

  This is a genuine Ford engine oil pump assembly for the 5.0L Coyote V8, listed in the Ford catalog under base number 6600 as Pump Assembly Oil, also called Engine Oil Pump. Driven off the front of the crankshaft, the oil pump draws oil from the sump and delivers pressurized oil through the filter and galleries to the bearings, cam phasers, lifters, and timing chain tensioners, making it critical to engine longevity. It fits 2011-2014 Ford F-150 and 2011-2013 Lincoln Mark LT equipped with the 5.0L V8 gasoline engine. Owners usually replace the oil pump when they experience low oil pressure warnings, a lit oil-pressure lamp, ticking or knocking from oil-starved lifters and phasers, variable cam timing faults, or whine from a worn pump, and it is commonly renewed as preventive maintenance during a timing chain or front cover job since access requires removing the front of the engine. Because the variable cam timing system on the 5.0L is sensitive to oil pressure and flow, using the correct genuine Ford pump preserves proper phaser operation and prevents cold-start rattle. Replace the front crankshaft seal, oil pan gasket, and any single-use bolts disturbed during installation, prime the pump and use fresh oil and a new filter on startup, and torque all fasteners to Ford specification. Genuine Ford construction guarantees correct rotor clearances and pressure-relief calibration for this engine.

• Applications: 5.0L.

WARNING: California Proposition 65

×

California Proposition 65

WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov