Details

• Brand:

  

  

• SKU:

  CR3Z-2C150-A

• Positions: Front
• Other Names:

  Pin Locating, bkcf12

• Description:

  This genuine Ford caliper pin kit is the disc brake caliper guide pin and hardware set for the 2011-2014 Ford Mustang. Ford catalogs base 2C150 as a caliper locating or guide pin, the sliding pins that let the floating caliper move squarely against the rotor so the brake pads wear evenly and release cleanly. The kit typically includes the guide pins along with their protective boots, keeping grease in and water and grit out of the pin bores. Buyers need this part when the caliper is sticking or dragging, when the pads show uneven or tapered wear, when a wheel is running hot, or when torn or dried-out pin boots have allowed the guide pins to seize or corrode in their bores. Replacing worn guide pins and boots during a brake job restores smooth caliper float and consistent pad contact, which improves pedal feel and pad life. Because these are authentic Ford components they match the original pin diameter, length, and boot fit so the caliper slides freely without the binding that causes premature pad and rotor wear. Confirm the application, clean the caliper bracket bores, and lubricate the pins with high-temperature caliper grease before installation. These caliper fasteners are torque-critical; tighten them to the Ford-specified value, and if they are the single-use type, do not reuse the old pins or bolts. Bed in the brakes and confirm the caliper floats freely after assembly.

• Replaces:

  br3z2c150a

WARNING: California Proposition 65

×

California Proposition 65

WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov