Details

• Brand:

  

  

• SKU:

  CR3Z-9H307-B

• Positions: Left
• Other Names:

  Fuel Pump, Sender And Pump Assembly, pfs952

• Description:

  This genuine Ford fuel pump and sender assembly is the in-tank electric fuel pump module for the 2011-2014 Ford Mustang, fitting both the 3.7L V6 and the 5.0L GT. Ford catalogs base 9H307 as a Fuel Pump and Sender Assembly, and it combines the electric pump, the strainer, the pressure regulation components, and the fuel level sending unit in one module that mounts inside the fuel tank. It draws fuel from the tank and delivers it at the pressure the engine needs while the integrated sender reports the fuel level to the gauge. Owners search for this part when the engine cranks but will not start, stalls or surges under load, loses power at high rpm, or when the fuel gauge reads erratically or sticks. A whining noise from the tank, long crank times, and hard hot restarts are common symptoms of a failing pump module. Installing the complete factory assembly restores correct fuel volume and pressure along with accurate gauge readings, and replacing the whole module rather than an internal part avoids repeat failures. Because this is an authentic Ford component it matches the original flow rate, electrical connector, tank seal, and lock-ring fit so it drops into the factory opening without modification. Relieve the fuel system pressure and disconnect the battery before service, replace the tank seal ring on installation, and prime the system and check for leaks before starting the engine.

• Replaces:

  br3z9h307b, cr3z9h307a

WARNING: California Proposition 65

×

California Proposition 65

WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov