Details

• Brand:

  

  

• SKU:

  PW-502

• Other Names:

  Motorcraft™ Water Pump Assembly, Motorcraft™ Water Pump, Pump Assembly Water

• Description:

  This is the genuine Ford Motorcraft engine water pump for 2011 through 2016 F-250 and F-350 Super Duty trucks powered by the 6.7L Power Stroke diesel, serving the engine's main cooling circuit. The water pump is belt-driven and circulates coolant through the block, cylinder heads, oil cooler, and radiator to carry away combustion heat and hold the diesel at its correct operating temperature under load and towing. It is supplied as a complete assembly and includes the gasket and pulley, so the impeller, bearing, shaft seal, and mounting flange arrive as a matched unit. A buyer searching for this pump is typically dealing with a coolant leak from the pump weep hole, a worn or noisy bearing, a wobbling pulley, coolant seeping onto the front of the engine, or an overheating condition on a heavily worked diesel. Because a failed diesel water pump can quickly lead to high coolant temperatures, replacing it with the correct OEM Motorcraft unit protects the engine and restores full cooling capacity. During installation, drain the cooling system, fit the supplied gasket on a clean sealing surface, torque the bolts in the specified sequence, and reinstall the belt with proper tension, then refill with the correct Ford coolant, bleed the system, and check for leaks and normal temperature. Confirm the engine is the 6.7L Power Stroke before ordering, as this pump is specific to that diesel and its main cooling circuit and differs from the secondary coolant pump used on the same engine.

• Applications: 6.7L DIESEL - MAIN COOLING SYSTEM.

WARNING: California Proposition 65

×

California Proposition 65

WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov