Details

• Brand:

  

  

• SKU:

  BC3Z-8C368-B

• Other Names:

  Water Manifold, Thermostat Housing, Pipe Water By Pass

• Description:

  Genuine Ford OEM engine coolant thermostat housing, also cataloged as the water manifold or water by-pass pipe, for 2011-2016 Ford F-250, F-350, F-450 and F-550 Super Duty trucks equipped with the 6.7L Power Stroke turbo diesel. This housing routes engine coolant at the thermostat and water-outlet joint and directs bypass flow through the cooling circuit; the Ford service part is supplied complete with the gasket, housing and thermostat so the coolant control point is renewed as a unit. A warped, cracked or corroded housing, or a stuck thermostat, produces external coolant leaks at the housing seam, overheating or slow warm-up, erratic coolant temperature, and can set temperature-related fault codes. Buyers reaching for this part are usually chasing a coolant seep at the housing, a temperature gauge that swings or runs hot, or a cabin that never reaches full heat because the thermostat is hanging open. Because the assembly includes the thermostat and its gasket, installation restores correct coolant flow and sealing in one step rather than reusing an aged, distorted housing. Ford catalog name is Pipe - Water By-Pass / Water Manifold / Thermostat Housing. Replace the sealing gasket and any single-use O-rings, torque the housing evenly to avoid warping the flange, then refill and bleed the cooling system before returning to service. Backed by Ford and Motorcraft parts warranty.

• Notes: Includes Thermostat, Gaskets And Coolant Temp Sensor.
• Applications: 6.7L DIESEL - MAIN COOLING SYSTEM.
• Replaces:

  BC3Z8C368A

WARNING: California Proposition 65

×

California Proposition 65

WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov