Details

• Brand:

  

  

• SKU:

  BB5Z-7E395-E

• Other Names:

  Cable, Shift Control Cable, Cable Assembly, Cable Assembly Selector Lever Con

• Description:

  This is a genuine Ford automatic transmission shift control cable, the selector cable that links the gear selector to the transaxle manual lever, for the 2011-2019 Ford Explorer and Explorer-based Police Interceptor Utility equipped with the 6F50 or 6F55 six-speed automatic transaxle. Ford catalogs it as a Shift Control Cable or Cable Assembly Selector Lever Control; it translates the driver's gear selection into physical movement at the transmission, ensuring the gear indicated by the shifter matches the gear the transmission actually engages. Drivers look for this cable when the gear selector feels loose, sloppy, or disconnected, when the shifter position does not match the actual gear, when the vehicle will not shift out of park or into a selected gear, when the transmission range display is inaccurate, or when a frayed, stretched, seized, or broken cable makes shifting difficult. A worn cable bushing or damaged end fitting is a common failure point. Installation routes the cable between the shifter assembly and the transmission selector lever with the retaining clips and grommets seated, and the shift linkage should be adjusted so that each selector position aligns correctly and the vehicle starts only in park and neutral after the work is complete. This part supersedes earlier BB5Z-7E395-A and BB5Z-7E395-C service numbers. Confirm the transmission and model year for your vehicle before ordering. As a genuine Ford part it matches the original length, routing, and end-fitting design for correct fit and precise shift feel.

• Replaces:

  bb5z7e395a, bb5z7e395c

WARNING: California Proposition 65

×

California Proposition 65

WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov