Details

• Brand:

  

  

• SKU:

  DB5Z-5B758-B

• Positions: Rear Right Right, Right
• Other Names:

  Steering Knuckle, Suspension Knuckle, Kit Bushing Repair

• Description:

  This genuine Ford rear knuckle is the passenger side wheel carrier for the independent rear suspension, holding the rear wheel bearing and hub while providing the mounting points for the upper and lower control arms, toe link, and the wheel speed sensor. It fits 2011 through 2019 Ford Explorer and Police Interceptor Utility and is the right hand rear knuckle with its integral bushing. A bent, cracked, or worn knuckle typically results from pothole impacts, curb strikes, or collision damage and shows up as poor rear alignment that cannot be corrected, uneven tire wear, clunks or looseness in the rear suspension, or repeat wheel bearing failures caused by a distorted bearing bore. Elongated or damaged control arm and toe link mounting holes also call for knuckle replacement because they let the wheel shift out of position under load. Installing the correct genuine Ford knuckle restores the factory suspension mounting geometry and bearing fit. This is the Ford catalog Knuckle for the rear passenger side. Because the arms, toe link, and hub all attach to it, plan to inspect those components and the wheel bearing during the swap, and reuse or renew fasteners according to Ford procedure, noting that several suspension fasteners in this area are single use torque to yield hardware that must be replaced. Torque everything to specification at ride height and perform a four wheel alignment afterward. Ordering by this part number ensures the correct passenger side knuckle.

• Replaces:

  bb5z5b758a, bb5z5b758b, bb5z5b758c, db5z5b758a

WARNING: California Proposition 65

×

California Proposition 65

WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov