Details

• Brand:

  

  

• SKU:

  BE8Z-6375-B

• Other Names:

  Flywheel, Flywheel Assembly

• Description:

  This genuine Ford flywheel is the manual-transmission clutch flywheel for the 2011-2019 Ford Fiesta equipped with the 1.6L TiVCT Sigma four-cylinder engine and the B5/IB5 five-speed manual transaxle. Bolted to the rear of the crankshaft, it provides the friction surface the clutch disc clamps against, stores rotational inertia to smooth idle and launch, carries the starter ring gear the starter motor engages to crank the engine, and transmits engine torque into the clutch and transaxle. Drivers replace it during a clutch job when the flywheel face is scored, heat-checked, blued from slippage, cracked, or worn below service limit, or when a worn starter ring gear causes grinding and hard starting. Symptoms that lead here include clutch chatter and shudder on takeoff, a burning smell, slippage under load, or noise on engagement that a new clutch disc alone will not cure. Ford catalogs it as Flywheel Assembly under BE8Z-6375-B for the manual application; it is specific to the five-speed manual and does not interchange with the automatic drive plate. Always replace or resurface within Ford limits, fit a matching clutch disc and pressure plate, and renew the flywheel mounting bolts, which are torque-to-yield single-use fasteners that must be replaced and torqued in sequence to Ford specification and never reused. This is a genuine Ford OEM flywheel built to factory balance and dimensional standards.

• Applications: MANUAL TRANS.

WARNING: California Proposition 65

×

California Proposition 65

WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov