Details

• Brand:

  

  

• SKU:

  QFL-10

• Description:

  This is a genuine Ford Motorcraft engine oil filter, catalogued under the QFL service number as an element-and-gasket oil filter kit. It mounts in the engine oil filter housing and traps abrasive metal, carbon, and combustion contaminants circulating through the lubrication system, protecting bearings, the oil pump, and other close-tolerance surfaces. The cartridge-style element seats against a gasket that seals the filter cap to the housing, and a fresh gasket is included so the cap reseals correctly at each service. Owners replace this filter at every scheduled oil change, or sooner when oil analysis shows elevated wear metals, when oil pressure readings drift, or when a previous filter was found collapsed or bypassing. Running a clogged or bypassing element lets unfiltered oil reach the bearings and accelerates engine wear, so timely replacement is important for diesel powertrains that load the oil heavily. Built to Ford Motorcraft specifications, the element provides the correct media area, anti-drainback behavior, and bypass pressure for the application, and it installs in the original housing without modification. Always lubricate the new sealing gasket lightly and torque the cap to the factory value to avoid leaks. Inspect the housing and drain valve while the cap is off, and confirm the application against the engine oil filter callout before installation.

WARNING: California Proposition 65

×

California Proposition 65

WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov