Details

• Brand:

  

  

• SKU:

  QFL-19

• Description:

  This is a genuine Ford Motorcraft engine oil filter, catalogued under the QFL service number as an oil filter element with sealing gasket. It seats inside the engine oil filter housing and filters the full flow of engine oil, capturing the abrasive wear metals, carbon, and grit that accumulate during normal operation. Clean oil reaching the bearings, oil pump, and valvetrain is what keeps an engine quiet and long-lived, and this element is engineered to provide that protection at the correct flow and pressure. Because it is a cartridge-style filter, the element is serviced with a fresh gasket so the cap seals tightly to the housing after each change. Owners install this filter at every oil service interval, or earlier when oil pressure wanders, when an oil analysis flags rising contamination, or when a previous element was discovered collapsed or bypassing. Leaving a clogged filter in service forces unfiltered oil through the bypass valve and onto the bearings, accelerating engine damage. Produced to Ford Motorcraft standards, the element offers the proper media area, anti-drainback behavior, and bypass setting for the application and installs in the factory housing without alteration. Always pre-lubricate the new gasket and tighten the cap to the specified torque, inspect the housing while it is open, and confirm the application before installation.

• Replaces:

  eu2z6731b, fl2066

WARNING: California Proposition 65

×

California Proposition 65

WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov