Details

• Brand:

  

  

• SKU:

  QFL-23

• Description:

  This is a genuine Ford Motorcraft oil filter element and gasket kit, catalogued under the QFL service number. The kit pairs the cartridge-style oil filter element with the sealing gasket needed to reseal the filter cap to the housing, so a single service item restores the full filtration assembly. The element seats in the engine oil filter housing and filters the entire oil flow, capturing abrasive wear metals, carbon, and contaminants before they reach the bearings, oil pump, and valvetrain. Keeping the oil clean preserves oil pressure and protects close-tolerance engine surfaces from accelerated wear. Owners install this kit at every scheduled oil change, and sooner when oil pressure readings drift, when an analysis shows rising contamination, or when a prior element was found collapsed, dirty, or bypassing. Running a clogged element forces unfiltered oil through the bypass valve and onto the bearings, which shortens engine life. Manufactured to Ford Motorcraft standards, the element delivers the correct media area, anti-drainback behavior, and bypass pressure for the application, and the included gasket ensures a leak-free cap seal. Pre-lubricate the new gasket, torque the cap to specification, inspect the housing while it is open, and confirm the application against the engine oil filter callout before installation.

• Replaces:

  fl2060

WARNING: California Proposition 65

×

California Proposition 65

WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov