Details

• Brand:

  

  

• SKU:

  AG9Z-9350-B

• Other Names:

  Mechanical Fuel Pump, Pump Assembly Fuel

• Description:

  This genuine Ford fuel pump is the engine-mounted high-pressure direct-injection pump for the 2.0L EcoBoost four-cylinder, fitted across a broad family of 2012-2019 vehicles including the Ford Edge, Escape, Explorer, Focus, Fusion, and Taurus, plus the Lincoln MKC, MKT, MKX, and MKZ. Ford catalogs it as a Pump Assembly - Fuel, and it is confirmed as the high-pressure fuel pump for these applications. Driven by a lobe on the engine camshaft, it takes the low-pressure feed from the in-tank pump and steps it up to the very high pressure the direct-injection system needs to spray fuel straight into the combustion chambers, with an internal control valve metering delivery to hold precise rail pressure across all operating conditions. Because it runs at extreme pressure and rides on the cam, it is a wear item, and when it weakens the engine may crank but struggle to start, run rough, stumble, or lose power under load, trigger fuel-pressure or misfire codes, or set the check-engine light while the high-pressure rail fails to reach target. A tapping noise from the pump area can also appear. Installing this correct factory pump restores proper rail pressure and clean direct-injection metering. Replace the pump follower or tappet and the mounting seal as directed during service, prime the system, and confirm the 2.0L EcoBoost application for your vehicle before installation so the pump matches the camshaft lobe and fuel-rail connections.

• Notes: In Tank Unit Includes Fuel Gauge Sending Unit.
• Replaces:

  ag9z9350aa

WARNING: California Proposition 65

×

California Proposition 65

WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov