Details

• Brand:

  

  

• SKU:

  CV6Z-5K978-A

• Positions: Rear Lower, Left Lower, Right Lower, Lower
• Other Names:

  Alignment Camber Adjusting Eccentric, Lower Control Arm Adjust Bolt, Suspension Cross-Member Adjust Bolt, Bolt

• Description:

  This genuine Ford alignment camber adjusting eccentric bolt is the cam bolt that pairs with the rear suspension adjust cam to set camber and toe on the 2012-2019 Ford Focus and Escape rear lower control arm. The eccentric head and washer rotate against the crossmember bracket, so turning the bolt shifts the control arm and moves the wheel to the factory alignment specification, then clamps it in place when torqued. It serves the rear lower, left or right, control arm adjustment locations on builds without AWD and with ST. Owners need this bolt when the original is seized, corroded, or rounded from road salt, or when it is disturbed during rear control arm, bushing, or knuckle service and can no longer hold a reliable clamp load. Symptoms tied to a failed adjuster include inner-edge or uneven rear tire wear and an alignment that will not stay in specification. This is a single-use fastener: Ford specifies it must not be reused or reinstalled once loosened, so always fit a new bolt, torque to specification, and perform a rear alignment. It installs with the matching adjust cam for a factory-correct rear suspension setup.

• Notes: Part cannot be reused/reinstalled.

WARNING: California Proposition 65

×

California Proposition 65

WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov