Details

• Brand:

  

  

• SKU:

  PW-639

• Other Names:

  Motorcraft™ Water Pump, Pump Assembly Water

• Description:

  This genuine Ford Motorcraft engine water pump fits the 5.0L V8 and the 5.2L GT350 and GT350R engines, covering F-150 and Mustang applications across the 2012-2025 span in the configuration with the power converter drive. The belt-driven pump circulates coolant through the block, cylinder heads, and radiator to hold operating temperature under high-rpm and heavy-load operation. It ships as a complete assembly. Owners commonly look for this pump after seeing coolant weeping or dripping from the weep hole, hearing a bearing whine or growl from the front of the engine, finding coolant residue on the front cover, overheating under load, or getting a recurring low-coolant warning. A pump with a worn bearing or a failed shaft seal cannot be resealed and should be replaced as a unit. Confirm the power-converter drive configuration for your engine, since versions without the converter use a different pump. Install any supplied gaskets clean and dry unless Ford specifies sealant, torque the fasteners in the correct sequence, refill with the correct Ford specification coolant, and bleed the cooling system fully to prevent a false overheat. Inspect the drive belt, tensioner, and thermostat during the job. Built to original Motorcraft specification for correct flow and durability.

• Notes: Includes Water Pump Gasket.
• Applications: 5.0L. 5.2L GT350, GT350R.

WARNING: California Proposition 65

×

California Proposition 65

WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov