Details

• Brand:

  

  

• SKU:

  CJ5Z-13410-A

• Positions: Left Outer, Right Outer, Rear Outer Outer
• Other Names:

  Turn Signal Light Socket, Socket Assembly

• Description:

  This genuine Ford socket and wire pigtail carries the bulb and electrical feed for the outer rear combination (tail) lamp on 2013-2016 Ford Escape. It plugs into the back of the outer tail lamp housing and supplies power and ground to the tail, stop, and turn signal bulb, so a fault here appears as a dead rear lamp, an intermittent or flickering rear light, a lamp-out warning on the cluster, or scorched and corroded terminals that persist even after the bulb itself is replaced. Because this connector is included with the tail lamp assembly from the factory, ordering the pigtail alone restores correct rear lighting without buying a complete lamp. The molded connector body, terminals, and lead wire match the original Ford specification for a weather-sealed fit and a reliable ground path. Position is the outer rear lamp. When installing, inspect the mating terminals in the housing for heat damage and make sure the bulb seats fully to prevent repeat overheating. Genuine Ford OEM construction ensures the correct amperage handling and connector geometry for the C520 Escape rear lighting circuit.

• Notes: Included with tail lamp assy.

WARNING: California Proposition 65

×

California Proposition 65

WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov