Details

• Brand:

  

  

• SKU:

  DG9Z-9047-C

• Positions: Lower
• Other Names:

  Connector Hose, Fuel Filler Hose, Fuel Tank Filler Neck, Hose Filler Pipe

• Description:

  The DG9Z-9047-C is a genuine Ford fuel filler pipe hose, cataloged by Ford as Hose - Filler Pipe, that connects the fuel filler neck to the fuel tank so fuel flows cleanly into the tank during refueling while the system stays sealed against vapor escape. It fits the 2013 through 2016 Ford Fusion across the 1.5L GTDI, 2.0L EcoBoost, 2.0L Duratec hybrid, and 2.5L Duratec engines in front-wheel and all-wheel drive layouts, and the corresponding Lincoln MKZ, and it is also cataloged on the 2017 Ford Escape filler circuit. As the lower flexible section of the fill path, it must resist fuel, heat, and flexing while holding a leak-tight and vapor-tight seal that the evaporative emissions system depends on. When this hose cracks, dries out, or its clamps loosen, drivers may notice a strong fuel smell near the rear of the vehicle, fuel leakage while filling or after a full tank, the pump nozzle clicking off early or slow filling, and an illuminated check engine light with evaporative emission or small-leak codes. Installing the correct Ford filler pipe hose restores a sealed, durable connection between the neck and tank and helps the vehicle pass emissions monitoring. Inspect the mating neck and tank nipples, seat the hose fully, and secure the clamps to the specified positions during installation. Verify your model, model year, and engine against the listed application before fitting.

• Notes: Included with filler pipe. Included with filler tube.
• Replaces:

  dg9z9047a

WARNING: California Proposition 65

×

California Proposition 65

WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov