Details

• Brand:

  

  

• SKU:

  DM5Z-17526-C

• Positions: Front Right Right, Front Right Front, Right, Right Front
• Other Names:

  Front Arm, Arm Assembly Wiper

• Description:

  This Genuine Ford windshield wiper arm is the front right (passenger side) arm assembly for the 2013-2018 Ford C-Max. The wiper arm connects the wiper motor linkage to the wiper blade, transferring the sweeping motion across the windshield and holding the blade against the glass with correct spring tension for consistent wipe pressure through the full sweep. Ford catalog name: Wiper Arm (Front Arm, Arm Assembly Wiper), passenger-side front position. A worn, bent, or corroded wiper arm is what a buyer is chasing when the blade skips, chatters, lifts off the glass at highway speed, leaves unwiped streaks at the edge of its sweep, or no longer parks correctly at the base of the windshield. Broken serrations at the pivot where the arm clamps to the wiper post are a common failure that makes the arm slip and stop wiping even though the motor still runs. This assembly installs onto the splined wiper pivot post and is retained by the pivot nut; the mating driver (LH) front arm carries a separate part number and is not interchangeable with this passenger-side unit. Because the pivot nut and wiper cowl trim must be removed for access, set the wiper motor to the park position before removal so the replacement arm can be indexed to the correct rest angle on reinstallation. As a Genuine Ford component it matches the original arm length, offset, and spring rate, so the blade sweeps the factory wipe pattern without contacting the A-pillar or leaving an oversized unwiped band. Fitment is specific to the 2013-2018 C-Max front passenger position.

WARNING: California Proposition 65

×

California Proposition 65

WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov