Details

• Brand:

  

  

• SKU:

  CV6Z-9A317-E

• Other Names:

  Fuel Line Retainer, Connector Hose Retainer, Evaporative Emissions System Line Clip, Clip

• Description:

  This is the genuine Ford feed line retainer clip for the 2013-2019 Ford Escape, catalogued by Ford under base number 9A317 as a fuel and vapor feed line retainer clip. The clip secures fuel feed, EVAP, or vapor lines to the body, frame, or engine bracketry, holding the tubing at the correct position and spacing so it cannot chafe, vibrate, or pull loose from its quick-connect fittings. Although small, a missing, broken, or brittle retainer clip lets lines sag and rub against sharp edges or hot components, which over time causes abrasion leaks, fuel or vapor odor, EVAP system leak codes, a failed emissions test, or a line that works free and disconnects. Using the correct OEM clip restores the factory routing and strain relief and ensures the line snaps into place with the proper retention force, which generic or reused clips often fail to provide. Installation is straightforward: route the line into the clip channel, seat it fully until it locks, and confirm the line is captured and clear of moving or heated parts. Because Ford produced this clip in several size-keyed variants for different line diameters, verify that the E variant matches your line size and application before ordering. Fitting this genuine retainer clip restores secure line routing and helps prevent chafing leaks, disconnected lines, and EVAP faults.

• Notes: Included with feed line. Included with connector hose.

WARNING: California Proposition 65

×

California Proposition 65

WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov