Details

• Brand:

  

  

• SKU:

  DB5Z-5310-K

• Positions: Left, Right, Front
• Other Names:

  Spring, Spring Front

• Description:

  This genuine Ford front suspension coil spring supports the weight of the vehicle at the front strut assembly, maintaining correct ride height and working with the damper to control body motion over bumps and during cornering. It fits 2013 through 2019 Ford Explorer models and is the specific spring rate and load code called out for this application, so ordering by this exact part number ensures the ride height and spring stiffness match the factory calibration. A weak, sagging, or fractured coil spring shows up as a nose down or leaning stance, reduced ground clearance, a clunk or knock from the front suspension over bumps, uneven tire wear, and a harsh or bottoming ride when the spring can no longer absorb suspension travel. Road salt and stone chips are common causes of coil corrosion and eventual cracking, and a broken lower coil can contact and damage the tire. Ford recommends replacing front springs as a matched pair so both sides settle to the same height and the vehicle sits level. This is the Ford catalog Spring Front assembly and installs with the factory upper and lower spring seats and isolators. A spring compressor is required to service the strut safely, and worn strut mounts and isolators should be inspected while the assembly is apart. Torque all fasteners to Ford specification and verify ride height after installation.

• Replaces:

  db5z5310f

WARNING: California Proposition 65

×

California Proposition 65

WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov