Details

• Brand:

  

  

• SKU:

  DA8Z-4K204-A

• Positions: Rear, Left, Right
• Other Names:

  Differential Housing Bracket, Bracket

• Description:

  This genuine Ford rear bracket, cataloged as a differential housing bracket, mounts the rear differential and driveline components to the body structure on all-wheel-drive versions of the 2013 through 2019 Ford Flex. It provides a rigid, correctly located anchor point that positions the rear drive unit, controls driveline movement under acceleration and braking, and isolates driveline vibration from the cabin. Because it is an all-wheel-drive component, it is used only on Flex models equipped with all-wheel drive. Owners need this bracket when the original has been cracked, bent, or corroded, when driveline clunk, vibration, or movement is traced to a failed or loose mounting bracket, or when it must be replaced as part of a differential or driveline service. A damaged or deteriorated bracket can allow excessive driveline movement, produce clunking on acceleration and deceleration, and accelerate wear on adjacent mounts and bushings. As a factory Ford part, its mounting holes, contour, and strength match the original so it bolts to the body and driveline hardware without modification and restores proper driveline alignment. Installation typically requires supporting the driveline, removing the old bracket hardware, and torquing all fasteners to the Ford-specified values; inspect related mounts and bushings while the area is accessible. Confirm your Flex is all-wheel-drive equipped and matches this configuration before ordering.

WARNING: California Proposition 65

×

California Proposition 65

WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov