Details

• Brand:

  

  

• SKU:

  DA8Z-13A006-B

• Positions: Left, Right, Front
• Other Names:

  Turn Signal Light Socket, Wire Assembly

• Description:

  This is the genuine Ford turn signal light socket and pigtail for the 2013-2019 Ford Flex equipped with HID headlamps. Ford catalogs this piece in the 13A006 socket-and-wire family; it is the bulb socket assembly that seats into the front turn signal and park lamp position of the headlamp housing and carries the short wire lead that connects the bulb to the vehicle harness. The socket locks into the lamp body, holds the bulb in correct alignment, and maintains the electrical contact that lets the front turn signal and parking lamp function. Owners typically replace this part when a front turn signal has stopped working or flashes rapidly, when the bulb will not stay seated, or when the socket has overheated, melted, corroded, or discolored from age and moisture intrusion. A damaged or high-resistance socket is a common cause of an intermittent or dead front signal even when a new bulb is installed, because the fault is in the connector rather than the bulb itself. This specific socket is correct for Flex models built with the HID high-intensity discharge headlamp option, so verify your headlamp type before ordering, as halogen-equipped cars can use a different socket. As a genuine Ford part it uses the correct terminal design, keying, and locking tab to fit the Flex headlamp housing and plug into the factory harness without splicing or adapters. Installation is straightforward: the socket twists into the back of the lamp assembly and the bulb inserts into the socket, restoring correct front lighting operation. Backed by the Ford new-parts warranty.

• Notes: Included with headlamp assembly.

WARNING: California Proposition 65

×

California Proposition 65

WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov