Details

• Brand:

  

  

• SKU:

  BM5Z-9439-A

• Positions: Upper
• Other Names:

  Fuel Injection Plenum Gasket, Intake Manifold Gasket, Manifold Gasket, Gasket Intake Manifold

• Description:

  This genuine Ford intake manifold gasket seals the joint between the intake manifold and the cylinder head on the 1.6L EcoBoost (SCTi/GTDI Sigma) four-cylinder engine, maintaining an airtight boundary so the turbocharged intake charge reaches every cylinder at full pressure without leaking to atmosphere. It fits 2013-2016 Escape, 2014-2019 Fiesta, 2013-2015 Fusion, and 2018-2019 Transit Connect models equipped with the 1.6L EcoBoost engine. A failed or hardened intake manifold gasket lets unmetered air enter the intake tract, which a driver typically notices as a rough or unstable idle, a lit check engine light with lean or misfire codes, hesitation under acceleration, a faint hissing or whistling from the intake, and reduced fuel economy or power. Replacing the gasket whenever the intake manifold is removed for service is standard practice because the original gasket takes a compression set and will not reseal reliably. Cataloged by Ford as Gasket - Intake Manifold under base 9439, this is the exact factory sealing component for the 1.6L EcoBoost intake, molded to the correct port pattern and thickness so the manifold torques down evenly against the head. Clean both sealing surfaces thoroughly before installation, confirm the manifold and head faces are flat and free of old gasket material, and torque the manifold fasteners in the specified sequence to avoid warping or leaks. Using the correct OEM gasket restores proper sealing, idle quality, and turbo boost integrity.

• Notes: Included with intake manifold.

WARNING: California Proposition 65

×

California Proposition 65

WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov