Details

• Brand:

  

  

• SKU:

  DS7Z-6333-G

• Positions: Upper
• Other Names:

  Bearing, Bearing Crankshaft Main

• Description:

  This genuine Ford crankshaft main bearing is a precision-graded engine bearing that supports the crankshaft in the block on the 1.5L EcoBoost / GTDI four-cylinder used in the 2014-2020 Ford Fusion, with the same bearing family serving the 1.5L and 1.6L Escape, 1.6L Fiesta, and Transit Connect applications. Main bearings sit between the crankshaft main journals and the block saddles and caps, riding on a pressurized oil film to carry the load of the rotating assembly while maintaining tight running clearance. This is a selective-fit part supplied in graded sizes identified by color and journal position, so the correct grade must be chosen to achieve the specified oil clearance for the particular journal; this listing covers the DS7Z-6333-G grade for its designated main position. Buyers need main bearings when rebuilding an engine or after bearing wear or failure, with symptoms such as a deep rumbling knock at the bottom of the engine, low oil pressure, or metal debris in the oil, often following oil starvation or contamination. Engine bearings are single-use precision parts and must not be reused once removed. Install dry of debris, lubricate with the specified assembly lubricant, verify clearance with a plastic gauge, and torque the main caps to the Ford-specified sequence. Selecting the correct graded bearing is essential to proper crankshaft clearance and long engine life.

• Applications: 1.5L. 1.6L.

WARNING: California Proposition 65

×

California Proposition 65

WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov