Details

• Brand:

  

  

• SKU:

  CM5Z-6582-G

• Other Names:

  Engine Valve Cover, Cover Cylinder Head

• Description:

  This is the genuine Ford engine valve cover, also called the cylinder head cover, for the 1.0L EcoBoost three-cylinder engine in the 2014-2021 Ford EcoSport, Fiesta, and Focus, cataloged by Ford under base 6582 as the Valve Cover. On this engine the cover is an integrated module that closes off the top of the cylinder head over the camshafts and valvetrain, sealing in engine oil while housing the crankcase ventilation passages that separate oil mist from blow-by gases before they return to the intake. This part supersedes the earlier CM5Z-6582-D and CM5Z-6582-F versions and includes the valve cover gasket, so the sealing gasket is supplied with the cover. Buyers replacing this cover are typically chasing an oil leak weeping down the head, oil in the spark plug wells, a whistling or lean-running condition from a cracked integrated ventilation diaphragm, or a warped or damaged plastic cover that will no longer seal. Because the ventilation system is built into the cover, a failed internal diaphragm can cause rough idle, elevated oil consumption, or stored engine codes that are cured only by replacing the complete cover. This genuine Ford cover matches the original camshaft-cover contour, bolt pattern, and ventilation design for the 1.0L engine. Clean the head sealing surface, install with the supplied gasket, and tighten the cover fasteners in the specified sequence to the correct torque to avoid warping the plastic and to ensure a lasting oil-tight seal.

• Notes: Includes Valve Cover Gasket.
• Applications: 1.0L.
• Replaces:

  cm5z6582d, cm5z6582f

WARNING: California Proposition 65

×

California Proposition 65

WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov