Details

• Brand:

  

  

• SKU:

  BC3Z-2C295-A

• Other Names:

  Tube Assembly Brake, BRTAR17

• Description:

  This genuine Ford ABS pressure hose is a pre-formed high-pressure brake tube assembly that routes hydraulic pressure between the ABS hydraulic control unit and the brake system on 2015-2016 Ford F-250 and F-350 Super Duty trucks equipped with the 6.2L gas V8, 6.8L V10, or 6.7L Power Stroke diesel. Ford catalogs the part under the Tube Assembly Brake family; it is pre-bent and pre-flared to follow the factory routing so it clears the frame, engine, and suspension without kinking and connects with the correct fittings at each end. Owners replace this line when it develops a leak at a fitting or along the tube, when corrosion or road debris has pitted the wall, when the brake pedal feels soft or drops, or when brake fluid loss triggers a low-fluid or ABS warning. Because it carries full ABS actuation pressure, any weeping or damage compromises braking and must be addressed immediately. Install with clean fittings, bleed the ABS system thoroughly following the Ford service procedure so no air remains in the modulator, and torque the tube nuts to specification to seal the flare without stripping. Use fresh brake fluid of the specified type and confirm there are no leaks under pressure before returning the truck to service. A genuine Ford pre-bent line restores the exact fit and pressure integrity of the original, which universal tubing cannot reliably duplicate.

WARNING: California Proposition 65

×

California Proposition 65

WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov