Details

• Brand:

  

  

• SKU:

  W714504-S303

• Positions: Lower
• Other Names:

  Rivet

• Description:

  This is a genuine Ford lower grille rivet, catalogued under base number W714504 with the S303 push-in specification, used to retain the lower front grille on the Focus equipped with the EcoBoost package. The rivet is a molded push-type fastener that snaps through the grille flange into the support panel, holding the lower grille section tight against the front fascia so it sits flush and does not rattle or sag at highway speed. Drivers searching for this part are usually reassembling the front end after bumper cover removal, replacing a cracked grille, or chasing a loose or missing fastener that lets the grille shift, buzz, or pop free in the airstream. Because it is a single-use style retainer, the original rivet is often damaged on removal and should be renewed rather than forced back in. Manufactured to Ford specifications, it matches the original head diameter and shank geometry for the factory mounting hole and installs by hand in the original location without modification. Inspect the mating holes in the grille and support panel for cracks or elongation before seating the new fastener, since a worn hole will not let the rivet lock and the grille will work loose again. Verify placement against the front-end trim diagram for the specific grille configuration so each retention point is filled and the lower grille is fully captured before the fascia is buttoned up.

WARNING: California Proposition 65

×

California Proposition 65

WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov