Details

• Brand:

  

  

• SKU:

  F2GZ-9B659-H

• Other Names:

  Inlet Tube, Hose Air

• Description:

  This is the genuine Ford engine air intake hose, cataloged as an air inlet tube, for the 2015-2018 Ford Edge with the 2.0L EcoBoost engine. The hose is the molded duct that carries filtered air from the air cleaner box through the intake tract toward the turbocharger and throttle body, and its diameter, contour, and sealed connections are designed to keep airflow smooth and leak-free so the engine receives clean, correctly metered air. As a flexible molded part in a hot, vibrating underhood location, it fatigues with age, and on a turbocharged engine it also sees boost pressure that stresses the seams and clamp joints. Owners typically replace this hose when it cracks, splits, tears at a bend, or loosens at a clamp, allowing unmetered or boosted air to escape, which shows up as a rough or unstable idle, hesitation, loss of boost and power, a whistling or hissing noise, and check-engine or lean-condition codes. A torn intake duct can also skew the mass air reading and trigger driveability faults. Fitting the genuine Ford hose restores the precise shape, internal diameter, and connection geometry the intake and turbo system were built around, so airflow metering and sealing return to factory behavior. On installation, seat each end fully, align the duct without twist or strain, and tighten the clamps to specification to prevent a boost or vacuum leak. Confirm the 2.0L engine and your VIN before ordering, because other engines and adjacent duct segments on this platform carry different part numbers.

• Replaces:

  f2gz9b659d

WARNING: California Proposition 65

×

California Proposition 65

WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov