Details

• Brand:

  

  

• SKU:

  BK2Z-6337-A

• Other Names:

  Thrust Bearing, Bearing Crankshaft Main Thru

• Description:

  This genuine Ford crankshaft main thrust bearing, or thrust washer, is the center main bearing thrust component that controls crankshaft end play in the 2015 through 2019 Ford Transit fitted with the 3.2L Duratorq-TDCi five-cylinder diesel engine backed by the 6R80 automatic transmission. The thrust bearing locates the crankshaft fore and aft, absorbing the axial loads transmitted through the torque converter and holding proper endplay so the connecting rods and main journals stay in alignment. Engine builders and technicians install this part during a crankshaft, main bearing or lower-end overhaul, or when excessive crankshaft end play is measured. Symptoms of a worn thrust bearing include a knocking or thumping that changes when the transmission is put in gear, fluctuating crankshaft endplay, and in severe cases contact damage to the block and crank thrust faces. Correct thrust clearance is critical, so measure end play on assembly and follow the Ford service specification and main bearing torque sequence. This is a precision-machined genuine Ford bearing sized to the factory tolerances for the 3.2L diesel, and it should be installed clean and lubricated with the correct bearing orientation. Confirm the 3.2L Duratorq application for your Transit before ordering.

• Applications: 3.2L DIESEL.

WARNING: California Proposition 65

×

California Proposition 65

WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov