Details

• Brand:

  

  

• SKU:

  F2GZ-6881-A

• Other Names:

  Adapter, Adapter Oil Filter

• Description:

  This is the genuine Ford engine oil filter adapter for 2015-2020 Ford EcoBoost applications, covering the 2.0L engine for 2015-2018 and the 2.3L engine from the 11/30/2015 build date, with the Ford Edge being a primary fitment for the 2.0L. The adapter is the machined housing that bolts to the engine block and provides the threaded mount and sealing surface for the spin-on or cartridge oil filter, routing pressurized oil from the pump through the filter and back into the engine's oil galleries. It typically carries the oil-to-filter passages and the sealing gasket or O-ring interface that keeps that high-pressure oil contained. A buyer needs this part when the adapter is leaking oil at its block gasket or filter base, when the threads or sealing land are damaged, or when a previous filter was overtightened and distorted the mating surface, any of which shows up as oil seepage down the side of the block, low oil level, or oil on the ground after parking. Fitting the genuine Ford adapter restores the correct passage geometry, gasket seat, and filter thread so oil pressure and filtration stay as engineered. Always renew the adapter gasket or O-ring during installation, clean the block mating face, and torque the fasteners to Ford specification to prevent a repeat leak, then run the engine and recheck for weeping. Because this adapter spans more than one EcoBoost engine and body line, confirm your engine displacement, build date, and VIN before ordering to be sure this suffix matches your application.

WARNING: California Proposition 65

×

California Proposition 65

WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov