Details

• Brand:

  

  

• SKU:

  F2GZ-9B659-C

• Positions: Rear, Upper
• Other Names:

  Air Inlet Assembly, Air Duct, Hose Air

• Description:

  This is the genuine Ford engine air intake hose, cataloged as an Air Inlet Assembly and identified as the rear upper section, for the 2015-2020 Ford Edge and Lincoln MKX with the 3.5L V6 engine. The hose is the molded duct that channels filtered air from the air cleaner box toward the throttle body and engine, and its shape, internal diameter, and mounting points are engineered to deliver a smooth, unrestricted, and correctly sealed airflow path so the engine receives clean metered air. Because it is a flexible molded component living in the hot underhood environment, the rubber and plastic harden and fatigue over time. Buyers usually need this hose when it splits, cracks, tears at a bend, or works loose at a clamp, which lets unmetered air into the intake and produces a rough or hunting idle, hesitation, a whistling or sucking noise under acceleration, illuminated check-engine or lean-condition codes, and sometimes reduced power. A collapsed or misrouted hose can also disturb the mass air reading. Installing the genuine Ford hose restores the exact contour, diameter, and connection fit so the air metering and sealing match the factory design, which off-brand ducts frequently miss. During installation, seat every connection fully, position and tighten the clamps to specification, and confirm there are no gaps or twists that could allow a vacuum leak. Verify the 3.5L engine and your VIN before ordering, as other engines and duct sections on this platform use separate part numbers.

• Notes: Included with air cleaner assembly.

WARNING: California Proposition 65

×

California Proposition 65

WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov