Details

• Brand:

  

  

• SKU:

  FL3Z-7C410-B

• Other Names:

  Automatic Transmission Oil Cooler Hose Assembly, Tube Oil Cooler

• Description:

  This genuine Ford oil cooler tube is part of the automatic transmission fluid cooling circuit on the 2015 through 2020 F-150 equipped with the 2.7L or 3.5L EcoBoost V6 and the 6R80 six-speed automatic transmission. Ford's catalog name for the part is Tube - Oil Cooler, serving as the inlet line that routes transmission fluid into the cooler so heat can be removed before the fluid returns to the transmission. Maintaining transmission fluid temperature is critical to the life of the clutches, valve body, and torque converter, and a cracked, corroded, or leaking tube, or a failed quick-connect seal, can cause fluid loss, low fluid level, overheating, harsh or slipping shifts, and red transmission fluid leaking onto the ground. Buyers commonly need this tube after locating a leak at the line or its couplers, corrosion caused by road salt, or damage from road debris. Since the tube carries pressurized transmission fluid, the quick-connect fittings must seat and lock completely, and any worn connector seals or O-rings should be renewed at the same time. After fitting the tube, refill with the correct specification transmission fluid and inspect for leaks with the system at operating temperature. This inlet tube pairs with the matching outlet tube in the same cooling circuit. Confirm your F-150 uses the 2.7L or 3.5L EcoBoost V6 with the 6R80 transmission before ordering, as the 5.0L V8 and other cooling configurations use their own tube part numbers.

• Replaces:

  fl3z7c410a

WARNING: California Proposition 65

×

California Proposition 65

WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov