Details

• Brand:

  

  

• SKU:

  FL3Z-7B028-L

• Other Names:

  Outlet Tube, Outlet Pipe, Tube Oil Cooler

• Description:

  This genuine Ford oil cooler tube is part of the automatic transmission fluid cooling circuit on the 2015 through 2020 F-150 equipped with the 2.7L or 3.5L EcoBoost V6 and the 6R80 six-speed automatic transmission. Ford's catalog name for the component is Tube - Oil Cooler, and this is the outlet line that carries transmission fluid from the quick-connect fitting out to the cooler, routing hot fluid so it can shed heat before returning to the transmission. Keeping transmission fluid within its proper temperature range is essential to clutch and valve-body longevity, and a cracked, corroded, or leaking cooler tube, or a failed quick-connect seal, can cause fluid loss, low fluid level, overheating, harsh or slipping shifts, and a puddle of red transmission fluid under the truck. Buyers usually need this tube after discovering a leak at the tube or its connectors, corrosion from road salt, or physical damage from debris. Because it handles pressurized transmission fluid, the line must seat fully at the quick-connect couplers and be routed correctly away from heat and moving parts. Replace the connector seals or O-rings as needed, verify the fittings click and lock completely, and top off with the correct specification transmission fluid after installation, checking for leaks with the system at operating temperature. Confirm your truck uses the 2.7L or 3.5L EcoBoost V6 with the 6R80 transmission before ordering, as the 5.0L V8 and different cooling configurations use their own tube part numbers.

• Replaces:

  FL3Z7B028C

WARNING: California Proposition 65

×

California Proposition 65

WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov