Details

• Brand:

  

  

• SKU:

  HL3Z-14A664-B

• Other Names:

  Air Bag Clock Spring, Cover And Contact Plate Assembly

• Description:

  This genuine Ford clock spring, listed in the Ford catalog as the Cover and Contact Plate Assembly, is the rotating electrical connector behind the steering wheel that keeps a continuous circuit between the stationary column and the turning wheel through a coiled flat ribbon conductor. It transfers the driver airbag firing signal, horn, cruise control, audio and steering-wheel switch circuits as the wheel rotates lock to lock. This particular assembly is the configuration for 2015 through 2021 Ford F-150 and Expedition models equipped with power tilt/memory and a heated steering wheel, so it carries the additional circuits those options require; trucks without the heated wheel and memory use the sibling HL3Z-14A664-A, and matching your build is essential for correct operation. Common symptoms of a failed clock spring include a lit airbag warning lamp, a horn that works intermittently or not at all, dead cruise or radio buttons on the wheel, loss of heated-wheel function, and a clicking or grinding sound from the column when steering. Because this feeds the supplemental restraint system, any stored airbag fault should be addressed without delay. When installing, disconnect the battery and let the restraint system power down, then center the new clock spring to the straight-ahead position before fitting the wheel so the internal ribbon is not torn at full steering lock. Built to Ford Motor Company standards, it installs as a direct factory replacement and carries the OEM warranty.

• Replaces:

  FL3Z14A664A

WARNING: California Proposition 65

×

California Proposition 65

WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov