Details

• Brand:

  

  

• SKU:

  MCF-2384

• Positions: Front Right Upper Right, Right
• Other Names:

  Motorcraft™ Suspension Control Arm, Arm Assembly Front Suspension

• Description:

  This genuine Motorcraft front upper control arm is the passenger-side, right-hand upper suspension link that locates the top of the steering knuckle and works with the lower arm to control wheel geometry through suspension travel. The assembly comes complete with its upper ball joint and bushings preinstalled, so it restores both the pivot points at the frame and the knuckle in one service. It fits 2015-2020 Ford F-150 trucks in both two-wheel-drive and four-wheel-drive configurations, without the Raptor package. Worn control arm bushings or a failing ball joint show up as clunking or knocking over bumps, uneven or accelerated tire wear, loose or wandering steering, and difficulty holding an alignment. Because the ball joint is integral, a worn joint means replacing the arm as an assembly rather than the joint alone. This Motorcraft arm matches the factory mounting geometry, bushing durometer, and ball-joint spec for correct ride and handling. An alignment is required after installation to set camber and caster, and the mounting and knuckle hardware should be torqued to Ford specification. Replace the matching left-hand arm if it shows similar wear for balanced handling.

• Notes: Includes Upper Ball Joint. Part has related component that cannot be reused/reinstalled. bolt and nut.
• Applications: 2WD. 4WD.

WARNING: California Proposition 65

×

California Proposition 65

WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov