Details

• Brand:

  

  

• SKU:

  W705589-SS5YZ

• Positions: Rear Rearward Front, Rear Rearward Rear, Left Front, Left Rear, Right Front, Right Rear
• Other Names:

  Front Deflector Retainer, Mud Shield Rivet, Rear Deflector Retainer, Rear Molding Retainer, Wheel Opening Molding Pin, Stone Deflector Clip, Wheel Arch Molding Clip, Pin Special

• Description:

  This is a genuine Ford wheel opening molding retainer pin, catalog base number 705589, for the 15-20 F-150. The pin is a push-in special fastener that secures the wheel opening molding and stone deflector trim to the body side at the wheel arch, snapping into a body hole to hold the molding flush and tight against the sheet metal. It locates the molding at the front and rear wheel openings on left and right sides and is offered for the 5.5, 6.5, and 8 foot box body configurations, so it covers the full range of cab and bed combinations on this generation truck. Drivers look for this retainer when a wheel arch molding has begun to lift, rattle, or flap at highway speed, when a deflector has been knocked loose at a car wash or in service, or when an original pin has aged, cracked, or pulled out and left the trim sagging. It is a single-use style push pin that is best replaced rather than reused once removed, since the barbs that grip the body hole lose their bite after the first install. The pin is commonly serviced alongside the molding itself, and a fresh set restores the factory snap-in fit without drilling or adhesive. Manufactured to Ford specification, it matches the original diameter and length for a secure hold. Confirm the retainer location against the wheel opening molding diagram for the specific box length before installation, and inspect the molding clip flange for damage while the trim is off.

• Notes: Included with rear molding.

WARNING: California Proposition 65

×

California Proposition 65

WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov