Details

• Brand:

  

  

• SKU:

  GR3Z-6211-B

• Other Names:

  Bearing Connecting Rod

• Description:

  This is a genuine Ford connecting rod bearing for the 2015-2020 Mustang with the 5.0L Coyote V8. The connecting rod bearing is a precision half-shell insert that rides between the connecting rod big end and the crankshaft rod journal, providing a low-friction hydrodynamic oil film that carries combustion and inertial loads while the crankshaft spins. Ford selects rod bearings by grade to hold the correct running clearance, so the workshop manual grade and journal measurements should be checked before fitting to ensure proper oil clearance and oil pressure. Each bearing shell locates on the rod tang and must be installed clean and dry on its back, with assembly lubricant applied only to the running face. Worn or spun rod bearings typically announce themselves with a deep rhythmic knock that rises with engine speed, low oil pressure, metal flake in the oil, or debris caught on the filter, often after oil starvation, contamination, or high-mileage wear. This bearing is used during a rod bearing refresh, crankshaft service, or full engine rebuild on the Coyote V8. Ford catalogs this component as the Connecting Rod Bearing for the 5.0L engine. Install it as part of a complete bearing renewal and verify clearance with plastigage before final assembly to protect the crankshaft and rods.

• Notes: Price Listed Is For One Upper And Lower Bearing.
• Applications: 5.2L.
• Replaces:

  gr3z6211a

WARNING: California Proposition 65

×

California Proposition 65

WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov