Details

• Brand:

  

  

• SKU:

  GR3Z-6507-B

• Other Names:

  Valve Inlet

• Description:

  This is a genuine Ford engine intake valve for the 2015-2023 Mustang equipped with the 5.0L Coyote V8. The intake valve opens on the induction stroke to admit the air and fuel charge into the combustion chamber, then seals tightly against its valve seat during compression and combustion to hold cylinder pressure. Its stem rides in the valve guide while the tulip-shaped head seats on the cylinder head, and it relies on the valve spring, retainer, and keepers to close fully and to transfer combustion heat into the seat and guide. A worn, burned, or bent intake valve can cause compression loss, rough idle, misfire, popping back through the intake, hard starting, and failed leak-down or compression readings. Buyers typically need this valve during a cylinder head rebuild, valve job, or repair after valvetrain damage or a bent valve from over-rev or a timing failure on the Coyote V8. Ford catalogs this part as the Engine Intake Valve, also listed as the inlet valve, for the 5.0L application. It should be installed with proper valve lash and seat sealing, checking guide clearance and seat concentricity, and lapping or machining the seat as required for a leak-free seal before reassembly.

• Applications: 5.2L.
• Replaces:

  gr3z6507a

WARNING: California Proposition 65

×

California Proposition 65

WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov