Details

• Brand:

  

  

• SKU:

  FT4Z-6N652-D

• Positions: Right Inner Inner, Right Inner Outer, Right Inner Lower, Right Inner Upper, Right Outer Inner, Right Outer Outer, Right Outer Lower, Right Outer Upper, Outer Inner, Outer, Outer Lower, Outer Upper, Left Inner, Left Outer, Left Lower, Left Upper, Right Inner, Right Outer, Right Lower, Right Upper, Lower Inner, Lower Outer, Lower, Lower Upper, Right Lower Inner, Right Lower Outer, Right Lower Lower, Right Lower Upper, Left Upper Inner, Left Upper Outer, Left Upper Lower, Left Upper Upper, Upper Inner, Upper Outer, Upper Lower, Upper
• Other Names:

  Turbocharger Oil Line Gasket, Water Outlet Gasket, Water Inlet Tube Gasket, Water Outlet O-Ring, Oil Inlet Tube O-Ring, Water Inlet Gasket, Turbocharger Coolant Line Gasket, Upper Return Tube Gasket, Oil Inlet Tube Gasket, Oil Pipe Gasket, Water Return Tube Gasket, Inlet Tube Gasket, Outlet Pipe Gasket, Water Pipe Gasket, Oil Feed Tube Washer, Oil Feed Tube Gasket, Water Hose Assembly Gasket, Water Feed Tube Gasket, Oil Outlet Tube O-Ring, Mount Gasket, Oil Return Tube Gasket, Engine Coolant Pipe O-Ring, Oil Inlet Tube Washer, Water Outlet Hose Gasket, Water Outlet Pipe Gasket, Gasket

• Description:

  This genuine Ford gasket is a sealing O-ring for an engine water or coolant inlet tube, used across a range of 2015 and later Ford vehicles including the Edge and F-150 along with related models that share the base part. The O-ring seats in the joint where a coolant tube meets the engine, forming the seal that keeps coolant inside the passage under the pressure and temperature of the running cooling system. It is a precision elastomer ring sized to the groove and bore so it compresses to the correct sealing load without extruding. Buyers searching for this part are usually addressing a coolant seep or drip at a water inlet tube connection, replacing a hardened or cracked O-ring during a water pump, tube, or related cooling repair, or renewing the seal as a matter of course whenever the joint is disturbed. A failed O-ring lets coolant weep from the joint, which can lead to low coolant level, overheating, and visible residue around the connection. Cataloged under base number 6N652 as the gasket, this part belongs to a family of cooling and oil-line seals distinguished by suffix. As an original Ford component it is made to the correct material and dimension for the coolant joint it seals. This seal is single-use; install a new O-ring whenever the joint is opened and lubricate per the service procedure.

• Notes: Included with water pipe. Included with outlet pipe. Included with oil feed tube. Included with oil outlet tube. Included with oil return tube. Included with water return tube. Included with water hose assembly. Included with water outlet hose tube.

WARNING: California Proposition 65

×

California Proposition 65

WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov