Details

• Brand:

  

  

• SKU:

  W717827-S900

• Positions: Rear
• Other Names:

  Bolt And Washer Assembly Hex.Head

• Description:

  This genuine Ford suspension cross-member mount bolt is a hexagon-head bolt and washer assembly used at the rear of the Mustang to fasten the suspension cross-member to the body or subframe structure. The bolt locates the cross-member and carries the loads that set rear suspension geometry, so its clamp integrity directly affects handling, alignment, and ride stability. Because the cross-member anchors multiple suspension links, a fastener that has lost clamp load can allow movement that produces clunking, vague rear handling, and uneven tire wear. Owners typically need this bolt during a rear cross-member, subframe, or suspension service, or when the original fastener is corroded, stretched, or damaged. Ford specifies this bolt as one that cannot be reused or reinstalled, so a new bolt is required whenever the cross-member joint is opened to restore the correct clamp force. Manufactured to Ford tolerances, it provides the proper diameter, thread, and length to fit the original rear location without modification. Inspect the cross-member, mounting points, and surrounding bushings while the bolt is out, install the genuine fastener, and tighten it to the value in the Mustang rear suspension procedure. Using the correct bolt keeps the cross-member firmly located for stable, quiet, properly aligned rear suspension operation.

• Notes: Part cannot be reused/reinstalled.
• Replaces:

  w715786s900

WARNING: California Proposition 65

×

California Proposition 65

WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov